Condensation in and on Your Double Glazing

If you reside in the UK you will likely be used to dealing with some kind of condensation in your home, be it in your bathroom after a bath or shower, in your cooking area after cooking or on your windows.

Bad condensation buildup on the within a double glazed system
If you routinely delight in the very first 2 points above, chances are that this is one of, if not, the primary cause for condensation accumulation on your windows (in addition to a few other things) and in many cases this can be quickly cured by following some simple actions:

During cooking, make sure that all pans and pots are covered with a lid and open a window near to your cooking location

  • If you have a hood extractor over your cooker, utilise it as this will assist to move any wet air exterior
  • When bathing or showering, again, open a window and use an extractor fan if you have one
  • Avoid drying any cloths inside your house As they dry, the wet air will be released into your home.
  • Use your heating system to maintain a constant and steady temperature to make sure surfaces are kept warm, decreasing the possibility of condensation
  • Open your windows for at least an hour a day as this will allow clean air in to replace the warm damp air in your spaces
  • Where condensation does form, wipe it off as soon as possible to decrease the threat of it evaporating back in the air

These are some standard steps to take to a minimum of lower the threat of condensation, not just on your windows however likewise within your house as a whole. If wetness is kept to a minimum and your surfaces are kept at a constant temperature level this must go quite a way to decreasing any condensation accumulation threats.

If however the majority of your condensation problems exit in, on or around your windows then this may be an indication that this is where the problem lies.

When dealing with your double glazed systems, condensation usually forms in among 3 places:

  • On internal glazed faces
  • On external glazed faces
  • In-between glazed areas of the sealed double glazed system

As we have talked about above, if you primary problem is moisture on the internal areas of your glazing, attempt to decrease the quantity of moisture that exists in your house by routinely opening windows and doors and permitting fresh air to change stale, moisture-laden air, cook and shower with windows open and extractor fans on if you have them (if not, consider getting them fitted), dry clothes outside etc. …

By doing this you ought to see a drastic decrease in moisture accumulation, perhaps not clearing it all entirely but definitely minimising it to a more manageable level.

After taking our recommended steps and you see no or very little distinction, this may be a sign that your double-glazing is not what it once was and is now enabling the cold air outside to decrease the temperature level of the inner glass pane, producing perfect conditions for condensation.

If this holds true there is actually very little you can do besides change the sealed unit (glazed area) and frame and although this sounds expensive (in reality it is), it might not only cure your condensation issues however help to save money on your heating costs!

Condensation accumulation on the outside of a double glazed unit
This particular problem is really rather uncommon and remains in many cases an advantage! This is an indication that your windows are well thermally insulated. In failing or poor quality units, thermal transfer occurs where heat from the internal pane takes a trip across the air space and warms the external pane.

Where the heat transfer process is prevented from happening due to the thermal qualities of the sealed system, wetness can condense causing condensation.

Although this can be quite annoying as it undoubtedly obscures your vision out of the window, it’s a great issue to have and a sign that your windows are in good condition and avoiding too much heat loss.

Repairing Condensation Between Glazed Units

There is normally only one reason for condensation and wetness in between glazing and this is that the seal that seals the two glass panes has actually stopped working.

Sometimes there can be other causes such as uncommonly cold or humid weather condition, high existence of moisture from fresh paint, plaster or large scale construction work to the property or that the base of the frame is filled with water and with time this will slowly permeate in, but in practically all cases it’s down to the sealed unit itself failing.

At this point you actually just have 2 options:

  • Get the malfunctioning sealed unit replaced with brand-new
  • Get the system repaired

The first point is quite self explanatory– Get the specialists in to install a new sealed unit or if your double glazing is especially old, a whole brand-new frame and system.

In respect to the 2nd option, this is definitely one to think about. Over the past few years different business have actually emerged that specialise in the repair work of sealed units.

Before and after repair work
Prior to and after sealed unit repair– Image courtesy of infinityglassandmirror.net
The repair work procedure typically goes something like this– A small hole is drilled in either one or both of the panes or in the spacer bar. An unique drying representative is then pumped or injected into the unit drying it out and after that it is cleaned and resealed.

Different companies will use various methods and methods to achieve the repair work however in essence the moisture is removed and the system resealed.

Just like a lot of things you get what you pay for and a few of the cheaper repairs frequently stop working rapidly, so do your research study first if you are thinking about decreasing this path.

Post Sponsored by Chingford Glaziers – Glazier Local To Me.

This entry was posted in Broken Glass Issue, Glazier, Local Glaziers. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *