Condensation in and on Your Double Glazing

If you reside in the UK you will likely be used to dealing with some kind of condensation in your home, be it in your bathroom after a bath or shower, in your cooking area after cooking or on your windows.

Bad condensation buildup on the within a double glazed system
If you routinely delight in the very first 2 points above, chances are that this is one of, if not, the primary cause for condensation accumulation on your windows (in addition to a few other things) and in many cases this can be quickly cured by following some simple actions:

During cooking, make sure that all pans and pots are covered with a lid and open a window near to your cooking location

  • If you have a hood extractor over your cooker, utilise it as this will assist to move any wet air exterior
  • When bathing or showering, again, open a window and use an extractor fan if you have one
  • Avoid drying any cloths inside your house As they dry, the wet air will be released into your home.
  • Use your heating system to maintain a constant and steady temperature to make sure surfaces are kept warm, decreasing the possibility of condensation
  • Open your windows for at least an hour a day as this will allow clean air in to replace the warm damp air in your spaces
  • Where condensation does form, wipe it off as soon as possible to decrease the threat of it evaporating back in the air

These are some standard steps to take to a minimum of lower the threat of condensation, not just on your windows however likewise within your house as a whole. If wetness is kept to a minimum and your surfaces are kept at a constant temperature level this must go quite a way to decreasing any condensation accumulation threats.

If however the majority of your condensation problems exit in, on or around your windows then this may be an indication that this is where the problem lies.

When dealing with your double glazed systems, condensation usually forms in among 3 places:

  • On internal glazed faces
  • On external glazed faces
  • In-between glazed areas of the sealed double glazed system

As we have talked about above, if you primary problem is moisture on the internal areas of your glazing, attempt to decrease the quantity of moisture that exists in your house by routinely opening windows and doors and permitting fresh air to change stale, moisture-laden air, cook and shower with windows open and extractor fans on if you have them (if not, consider getting them fitted), dry clothes outside etc. …

By doing this you ought to see a drastic decrease in moisture accumulation, perhaps not clearing it all entirely but definitely minimising it to a more manageable level.

After taking our recommended steps and you see no or very little distinction, this may be a sign that your double-glazing is not what it once was and is now enabling the cold air outside to decrease the temperature level of the inner glass pane, producing perfect conditions for condensation.

If this holds true there is actually very little you can do besides change the sealed unit (glazed area) and frame and although this sounds expensive (in reality it is), it might not only cure your condensation issues however help to save money on your heating costs!

Condensation accumulation on the outside of a double glazed unit
This particular problem is really rather uncommon and remains in many cases an advantage! This is an indication that your windows are well thermally insulated. In failing or poor quality units, thermal transfer occurs where heat from the internal pane takes a trip across the air space and warms the external pane.

Where the heat transfer process is prevented from happening due to the thermal qualities of the sealed system, wetness can condense causing condensation.

Although this can be quite annoying as it undoubtedly obscures your vision out of the window, it’s a great issue to have and a sign that your windows are in good condition and avoiding too much heat loss.

Repairing Condensation Between Glazed Units

There is normally only one reason for condensation and wetness in between glazing and this is that the seal that seals the two glass panes has actually stopped working.

Sometimes there can be other causes such as uncommonly cold or humid weather condition, high existence of moisture from fresh paint, plaster or large scale construction work to the property or that the base of the frame is filled with water and with time this will slowly permeate in, but in practically all cases it’s down to the sealed unit itself failing.

At this point you actually just have 2 options:

  • Get the malfunctioning sealed unit replaced with brand-new
  • Get the system repaired

The first point is quite self explanatory– Get the specialists in to install a new sealed unit or if your double glazing is especially old, a whole brand-new frame and system.

In respect to the 2nd option, this is definitely one to think about. Over the past few years different business have actually emerged that specialise in the repair work of sealed units.

Before and after repair work
Prior to and after sealed unit repair– Image courtesy of
The repair work procedure typically goes something like this– A small hole is drilled in either one or both of the panes or in the spacer bar. An unique drying representative is then pumped or injected into the unit drying it out and after that it is cleaned and resealed.

Different companies will use various methods and methods to achieve the repair work however in essence the moisture is removed and the system resealed.

Just like a lot of things you get what you pay for and a few of the cheaper repairs frequently stop working rapidly, so do your research study first if you are thinking about decreasing this path.

Post Sponsored by Chingford Glaziers – Glazier Local To Me.

Posted in Broken Glass Issue, Glazier, Local Glaziers | Leave a comment

Suggestions on Damp, Leaks and Condensation Issues in the Home

When it’s putting down outside, there’s no better place to be than in your own house, warm and dry. What are you going to do when your house starts to let water in? Water in your house can cause damp, mould, and even wet rot. Condensation and damp can be caused by a number of reasons: drying out damp clothes, showers, kettles, and even our breath, and if it’s left unattended, it could trigger structural problems to your structure.

What is Condensation?
Condensation can form when there’s a difference between temperatures inside and outside, and enough humidity in the air. This will lead to damp and mould, and will certainly rot your window frames. Luckily, condensation is easy to deal with. Just wipe it down with a cloth, and merely rinse it down the drain. If the condensation still persists, attempt concealing your pots whilst cooking, not letting the kettle boil as long, keep the space well-ventilated, and in some extreme cases, you may need to use a dehumidifier. Do deal with condensation the moment you find it, since if you do not, it will turn into mould.

What is Mould?

Mould is a fungi that flourishes in humid conditions. Wash down all the contaminated area with a Health and Safety Executive-approved fungicidal wash. When you’ve cleared all the mould and you’ve left it to dry, refurnish if essential using a fungicidal paint and wallpaper paste. Attempt to keep the room well-ventilated at all times with air bricks, or even leaving the window open.

How about if it’s something more major, like damp?

Whether it’s increasing wet or penetrating damp it can trigger major structural problems to your house, and if it’s left ignored, it can die your plasterwork, damage your paintwork, and even ceilings can come collapsing down. Damp is simple to spot– it leaves tide marks, it’s dark, it’s cold to touch, and it is available in two forms.

Penetrating wet: that’s when you in the wall or the ceiling, which will let the rain water can be found in. It can even be available in from rain gutters and downspouts, and even rubbish left outside, accumulated against the wall– that can help permeating wet draw its method through the brickwork.

The other one is increasing moist– that’s when you haven’t got a sufficient DPC (which is a Damp-Proof Course) in the brickwork to stop water table of the ground permeating its way through.

Salt deposits on wall triggered by damp concerns

If it’s penetrating wet, you might be able to fix this yourself– discover where the water’s coming from, fix it, dry it out using a dehumidifier if you’ve got one, and then re-plaster if necessary and finish with the paintwork. If you do believe you’ve got increasing moist, you shouldn’t try to tackle this yourself: your entire home might require a new Damp-Proof Course. You’re going to need to utilise a certified specialist due to the fact that left unattended, it could result in yet another issue.

If damp or moisture gets into your woodwork, it can trigger damp rot. Wet rot is a fungus that enters into wet wood. It begins to weaken it from the inside out, it gives a dark wet look with fractures in the wood. It’s not as serious as dry rot, it can do major damage to your timbers, however you should be able to treat it yourself.

Fixing the Damage Caused by Damp, Rot and Condensation
Of all you need to establish where the water’s coming in, and then, of course, offer with it. Then you require to discover which timbers are rotten and need replacing. You can do this by getting yourself a sharp tool like a bradawl, just pressing it through the wood, and if you find it goes all the way through rather easy, you understand that it’s totally rotted– it has to be replaced with brand-new. However keep in mind, when you’ve gotten rid of all your rotten wood, you require to deal with the area with a damp rot fungicide, covering all the locations where the fungus could be hiding before you use any brand-new wood.

If you want to stop your issues with moist turning up once again, then always make certain your roofing is correctly maintained, that there aren’t any cracks in your walls, which absolutely nothing that might be gathering water is accumulated versus your external walls. And keep spaces that are prone to condensation well-ventilated, and always address an issue the moment you discover it, due to the fact that they won’t get better on their own.

Post Sponsored by Chelsea Glass 24/7 – Double Glazing Repair Specialist.

Posted in Broken Glass Issue, Glazier, Local Glaziers | Leave a comment

When the weather calls time on roofline

Since we started providing names, our winter season storms appear to have actually become more frequent and more fearsome than ever.

So even if you’ve got away the worst of it so far, it’s most likely worth inspecting your house for indications of damage before the next one hits– particularly to roofings, eaves and any walls that are exposed to the full force of the weather.

Smashed roof tiles in the driveway are a telltale sign, naturally. Less apparent are loose or damaged fascias and soffits that can lead to leakages and long-term water damage to your home.

Comprehending roofline
Fascias are the long boards that run along the bottom edge of your roofing system where it fulfils the walls (when they’re connected to the roofing at the gable end of a house, they’re often referred to as bargeboards). Soffits are the horizontal boards that fit in between the bottom of the fascia and the wall.

Known collectively as ‘roofline’, they add an attractive ending up touch to your home and protect the woods in your roof from the aspects.

Roofline boards that are old or rotten, however, can quickly be loosened up by high winds. Even PVC-U boards, particularly older types that frequently become brittle with age, can divide and fail.

When that happens, water will quickly discover its method into the roof space, producing the ideal conditions for moist and rot in your beams and rafters.

What to watch out for
In some ways, you can count yourself unlucky if a storm does serious damage to your roofline; a fascia or soffit that’s left hanging by a nail is simple to spot and fix.

More problematic are the divides, cracks and loose fittings you can’t see from the roadway, but which allowed water for months and even years without you knowing– till it’s too late and you’re taking a look at a pricey roofing system repair.

A pair of field glasses is a safe and efficient method to scan for suspected damage. Look for peeling or blistered paintwork, rust streaks that may suggest a broken screw or bracket, animal droppings or nests, overflowing rain gutters and water marks. All could be a sign that your roofline needs fixing or replacing soon.

If you still can’t see where the problem lies, then you may have to get out the ladders and take a look for yourself. However please, if you’re not comfortable at heights, hire the professionals instead of risk your own security.

What if your roofline requires replacing?
Any credible contractor will perform an examination of your roofline and provide you a reasonable evaluation of its condition. If they’ve reached their sell-by date and need changing, search for an NFB signed up contractor to do the job and request for recommendations before the work begins.

Nowadays, many people prefer to replace existing wood boards with low upkeep U-PVC roofline that provides the same level of security, without the annual repainting ritual.

Post Sponsored by Chigwell Roofing – Your Local Tiled Roof Repair Specialist.

Posted in Emergency Roofing, Flat Roof Repairs, Roof Repairs | Leave a comment

The Right Lighting Choice for Your Home

The Right Lighting for You
When you get around to looking for the ideal lighting for your decorating job, the option can be overwhelming. Do you desire ambient lighting or more focused spotlights? What sort of bulb are you looking for (and does it matter)? Are you trying to find a light to hang from the ceiling or to stand next to your couch? There are a lot of locations to trip up, which is why I’ve assembled this convenient little piece to assist you out.

Getting the ideal look for your home has to do with more than the colour of the walls or the style of the furnishings. Lighting is a practical necessity, but it also holds the crucial to the aesthetics of a space. If the lighting in your home isn’t right, you’ll draw attention far from whatever else that you’ve worked so hard on.

Things initially: what kind of bulbs do you want? Before you get down to size and wattage, which will eventually be dictated by other elements, you require to select the sort of bulb itself. Your option will generally be in between halogen bulbs, LEDs, and CFLs.

Halogens are the most common bulbs, the ones that you’ll discover all over the place. They’re attempted and real, and you can’t actually go too far wrong with them. That stated, they’re now starting to fall behind their energy-saving rivals in terms of reliability and cost.

CFL– Compact Fluorescent Bulb
One of these rivals is the compact fluorescent bulb (CFL). These are the traditional energy conserving light bulbs that last for several years but take a little time to warm up to full brightness. They’re a popular option in lots of houses, though there are concerns with the mercury that they launch when they’ve been gotten rid of, so they’re beginning to fall out of favour.

LED Bulbs
Changing them in the hearts of homeowners are LED bulbs. These bulbs use less energy than either of the two formerly pointed out choices, and although they cost more up front, they will save you far more cash in the long run. LED technology has likewise come a long way from the cold light that they produced at the end of the 20th century. You now have a large range of option from cool white light to warmer light more appropriate for a home.

When you’ve picked a bulb, the next choice to make is the design of the light itself, and it is here that the choice appears frustrating, but you really have a great deal of innovative flexibility.

Ceiling lights are common in every home, but they can actually set the tone for the room. A modern-day, unique-looking alternative like the one envisioned on the left below will complement a really different sort of space to the more conventional looking option on the right, though this 2nd light is also quirky adequate to make a huge distinction in the ideal room.

Ceiling lights set the design of a space
A really different kind of light, wall lights, can be used to terrific effect to either complement or change ceiling lights Just like ceiling lights, these can be extremely modern looking or they can be really traditional, and you must thoroughly think about the design of the remainder of the space when you are picking these.

Wall lights can change the mood of a room
Think about the two wall lights above. Both of them are older in style, appealing, perhaps, to a more standard style of space. However, that doesn’t imply that they are interchangeable. The exposed bulbs of the light on the left will typically be bolder and brighter, most likely to attract attention.

Contrastingly, the big shade on the right-hand man light guarantees that its result is more understated– part of the supporting cast instead of the lead actress. Depending on what else is in the room, and where you want to focus the visitor’s attention, you should have a pretty good concept of which one of these 2 lights is the much better alternative.

And finally, in lots of rooms you will have a flooring standing light alongside any other ceiling or wall lights. As you have probably thought by now, you must not just purchase the very first standing lamp that you see and assume that it’s going to do the best task. You must consider the type of lighting that you require and the design of the remainder of the furniture in the space, and then buy something that matches your requirements.

These sort of lights are portable to give you the ideal lighting for the tasks you are doing– reading, working, or taking part in your favourite pastime.

Standard Lamps or Floor Standing Lamps in Different Styles
Both of the lights imagined above are easy and modern, however just like all the previous examples, they would be utilised finest in various rooms. The left hand light is more matched to tidy, white, sparse environments, as seen by the background of the picture itself, whereas the light on the right appears warmer and more homely, so would work perfectly along with a chair or a couch in a living room.

Over to You
All that I have actually been discussing is actually just a beginning point. Now it’s over to you. Whatever embellishing job you’re dealing with, whatever look you’re opting for, I hope that this can assist you find the best lights to illuminate your space. Be innovative, be imaginative, and I’m sure that it will turn out fantastic.

Post Sponsored by Your Local Glazier. Find Us by typing in ‘Glazier Near Me‘ in your Google search.

Posted in Broken Glass Issue, Glazier, Local Glaziers | Leave a comment

How to Choose Stairs– 10 Things to Consider when Selecting the Right Stairs for Your Home

Stairs are often just viewed as functional, so couple of individuals comprehend the quantity of choice you have up until those choices are upon you and you need to make decisions fast. This is our fast guide to ensure that you are ready and able to make the best option of stairs when you need to.

These are the most crucial things that you require to understand:

Know the Jargon– Knowing the right stair and terminology will help you to quickly understand what is offered and what the salesperson (or website, in this day and age) is providing you. We have an excellent (we believe so anyhow!) guide to assist you browse all the staircase lingo. Have a quick scan through prior to you begin your staircase search and you’ll be “in the know”!
Area for Stairs– The area that is readily available is the most important thing when it pertains to choosing the right set of stairs. This is the most crucial restricting element so this will figure out a lot of the options you are enabled to make. You need to have a sensible understanding of the structure policies which determine what you are permitted to have. Discover the crucial stair measurements in Part K of the Regulations
Boring but Important– There are a few things that you will require to comply with when choosing your stairs. Here are some of the most important; you need a hand rails on at least one side or on both sides if they are over 1 metre broad. Flights should not go beyond 36 stairs without a bend or a landing. The spindles require to be no greater than 10 cm apart. You will need to have the stairs signed off by your regional building inspector.

Disruption and Dust– It is a big task to change your stairs, so it hardly ever takes place. This suggests that you need to probably try and think about a ‘timeless’ style, and brace yourself for trouble and dust. Certainly you will not be able to go up and down stairs while it is being done
Materials– The products that you use will have a huge effect on the type and feel of stairs. The most commonly utilised material is wood, however metal can be used as can other product, especially glass is incorporated into the balustrades increasingly more. Wood will supply a lot more traditional set of stairs, however other materials will make much more contemporary stairs. In the right setting stone stairs can develop a standard stair case, but in other they can be quite modern

Changing Stairs– When changing stairs there is a ‘template’ in the old stairs which you can follow and if you have space, and the spending plan, you can customise. If the stairs that you are changing doesn’t comply with the current structure regulations you must be able to replace them with the exact same, or much better (in regards to meeting the guidelines). Consider adding under stair cupboards to include storage area, or getting rid of the cupboard to create a sensation of area. Utilising open risers can allow more light through the stairs into the space below.
Stair Carpets– If you chose to have stair carpets you need to make sure that these are securely repaired and hard wearing; they will get a lot of traffic. Make certain that you don’t pick a carpet with loop stack as this might capture feet potentially causing journeys and they do open up (‘ smile’) when bent over the top of the step. Always use an underlay on the risers and the treads, and guarantee that the stack runs down the stairs, not across them.

Conventional staircase.

Practicalities– It is essential to consider who will be using the stairs. If children or the elderly are likely to be using it, as in the majority of household houses, you need to consider this when choosing your staircase. The need to be safe and easy to get up and down.

Contemporary modern-day staircase.

Made to measure or Bespoke? Nowadays there are 2 methods to get staircases. You can order a made to determine staircase from a staircase producer. These are constructed for the area that you have utilising the measurements that you provide so that the stairs will fit, but you will be picking from their series of designs and styles. These can be personalised by choosing a variety of choices, but ultimately they are not genuinely bespoke. To get a bespoke staircase you require to utilise a staircase designer to accomplish the special design that you are searching for.
Budget plan– Last however not least! Your budget will figure out much of what you can and can’t do. For example, if you desire a bespoke staircase then you will require to begin at somewhere between ₤ 15,000 and ₤ 20,000 and possibly spend much more. A made to determine stair case will normally cost someplace from ₤ 2-3,000 upwards but this will depend mainly on the materials utilised.

Post Sponsored by

Posted in Emergency Roofing, Flat Roof Repairs, Roof Repairs | Leave a comment

House Security Essentials for the Winter Months

Guaranteeing your family and your home are safe and safe and secure is always a leading consideration, however throughout the cold weather, this can become a more difficult endeavour.

With Autumn and Winter undoubtedly comes shorter days and longer, darker nights and this can provide thieves and others with less social and ethical fibre a lot more chance to carry out their questionable occupations.

Couple this with the Christmas festive season and the reality that a lot of us will be spending time far from house checking out family and friends or holidaying in warmer environments, then it’s a pretty sure thing that there will be a fair few residential or commercial properties empty for a minimum of a day or more.

In addition, with all the presents that are exchanged over the joyful period, rich pickings are almost ensured.

With this in mind, you truly require to take extra care and safety measures to ensure that these less than trustworthy people do not receive any additional presents, namely yours!

What Items are Stolen and When do Burglaries Occur?

When it concerns data of thefts reported throughout the winter months, these can offer us with some excellent insight into how and when to secure ourselves:

Usually, January is the top month for domestic thefts

Robberies during the winter season increase by 20% over the standard. Generally, burglaries tend to occur in between 4pm and 7pm in the evening. As January tends to be quite a quiet month that usually includes conference friends and family that we didn’t manage to catch up with over Christmas, we can value that this is probably the case.

As it is nearly dark by 4pm in the afternoon and in general, if you are out for the day, it’s generally 7 or 8 at night by the time you return, we can also value that many robberies could happen within this time window.

When it comes to the items that are most frequently taken during this time, you can definitely see the “Christmas style” as the majority of the products can easily appear on a lot of families Christmas wish lists:

  • Bikes
  • Mobile Phones
  • Power Tools
  • Laptop computers
  • Tablets
  • Cams
  • Golf Equipment
  • Garden Equipment

If you know you are going to be far from your home for long periods of the day and even several days, ask a friendly neighbour to pop around at night and close your curtains and change some lights on as this might assist to offer the impression that some one is at house.

How to Prevent Burglaries and Break-ins in your house

Despite the high levels of burglary-related criminal offence at this time of year there are quite a few things that we can do to reduce the threats of becoming part of the stats.

If you have a house automation setup in your property then you can set it to do the above recommendations for you, to turn lights on in the evening and off in the early morning and perhaps even open and close your curtains for you.

Ensure that any new bikes, garden products and so on … are securely locked away in a shed or garage as soon as it gets dark.

Similarly, do not leave any new phones, tablets, laptop computers, cameras or other important items in conservatories or beside windows. If an opportunist burglar is passing and sees that you have products such as this, then this may be all the incentive they require to “pop back for another visit”.

Post Sponsored Richmond Glass 24/7 – by Your Local Glazier in Richmond.

Posted in Broken Glass Issue, Glazier, Local Glaziers | Leave a comment

The Smart Method to Banish Condensation Moisture and Tidy Your Air

If you’ve hung around wiping streaming windows and mopping up watery windowsills, you’ll understand how frustrating condensation dampness can be. The issue is excess water vapour and it makes itself really easy to area.

A common first-step to dealing with the issue is attempting to decrease moisture levels in the worst-affected rooms. Dehumidifiers are a popular choice, as are portable moisture-absorbing items. However the initial indications of condensation moisture– most significantly streaming windows– become part of a wider issue. Dealing with individual spaces is, sadly, dealing with the symptoms and not the cause.

What Causes Condensation Dampness?

Condensation dampness is brought on by excess humidity. The typical family of four produces around 10 litres of water daily merely by cooking, bathing, washing and drying clothes, and even breathing. All that moisture is soaked up into the air and journeys to the coldest parts of your house where it condenses on cool surfaces like walls, windows and furniture.

Humidity and wet surfaces encourage mould spores to germinate. The tell-tale indication of black mould appearing on walls, often in cold corners and behind large pieces of furniture, is often what drives property owners to look for expert guidance. Appropriately so; black mould looks unattractive and merely reappears after surfaces are cleaned and repainted.

While mopping sills and wiping away mould patches are tiresome, it’s what you can’t see that in fact does one of the most damage. Mould spores are an irritant that intensify asthma signs. Recent evidence suggests that living in a moist environment can in fact cause asthma, and those investing over 16 hours a day at home are most at risk.

A wet, damp environment likewise offers the perfect breeding place for the household allergen. This little blighter, while microscopic and safe enough, produces faeces that take a trip in the air and aggravate the lungs of asthma victims.

Condensation Dampness Keeps Bad Company

If humid air stays caught inside the home, then so do the other primary perpetrators of indoor air contamination: CO2, nitrogen dioxide, formaldehyde, and Volatile Organic Compounds (VOCs), amongst others. These chemicals and gases are produced from burning fuel (using a gas stove, lighting fires or using a wood burner); from cleaning, DIY and charm products; from cooking, smoking, and even from your gas central heater.

A current report published earlier this year by the Royal College of Physicians has exposed some alarming statistics about the impact of indoor air pollution on our health. Indoor air can be as much as 50 times more contaminated than outside air, consisting of approximately 900 potentially unsafe chemicals. This can increase our opportunities of developing severe illness consisting of lung cancer and cardiovascular disease.

Take on the Cause, Not the Symptoms

Condensation moisture ends up being a problem if the house isn’t adequately ventilated– insufficient fresh air is coming in to replace the stagnant, humid air. The problem is even worse in colder weather condition as the material of the home gets cooler and moisture-laden air is drawn to the coldest surface areas. It’s most apparent in homes that aren’t consistently heated or that experience cold spots, but is also a consequence of insulating walls and lofts to enhance energy-efficiency as the humidity is efficiently sealed inside the house.

Extract fans can help eliminate moisture in the instant location, however as they work intermittently and are triggered when humidity levels are at their greatest, they are not powerful sufficient to aerate the entire home and extract the excess water vapour that causes moist.

In order to minimise wetness levels and tidy the indoor air, approximately four air modifications per hour is required. This is a job for whole-house ventilation, which makes sure that a property is aerated throughout, not just in the damp spaces.

Post Sponsored by Loughton Roofs – For All Your Flat Roof Repairs in Loughton.

Posted in Emergency Roofing, Flat Roof Repairs, Roof Repairs | Leave a comment

How Condensation on the Toilet Cistern can Ruin Your Bathroom and how to Avoid it

Bathrooms are hot. When the radiators are off all over the house, there is a good chance that the towel rail in the bathroom is still on. Bathrooms are likewise really damp, it’s what they are for! All of these elements are a recipe for condensation issues.

Include heat and water together and you get humidity. The bathroom is absolutely choc a bloc with humidity!

Add to this heat and humidity an extremely cold surface area such as your cold water toilet tank or the cold water pipes which feed your tank, the bath and the basin.

Your cold water, coming from the mains, is usually between 5 and 20 degrees. Warmer if it originates from a cold water tank in the loft, but nevertheless, much colder than the temperature in your bathroom.

This cold water makes the surface of the toilet tank very cold and, or course, the surface of the cold water taps really cold too. The moment the humid hot from the bathroom strikes the cold surface of the cold pipelines or toilet cistern, it immediately turns to liquid, spilling water all over the flooring. This is called sweating in the trade and you can be sure that in one week alone the tank and cold pipes sweat a fair bit!

There are a couple of methods to stop, or quite minimise, condensation on the toilet tank. The very first is to have plenty of air changes in the room. This is simple if your bathroom has a window; you just open it 2 or 3 times a day.

If you do not have a window nevertheless, you are dependent on the extractor fan to take the hot air (and the smells) out of the bathroom and new air to enter through the door. The new air nevertheless, is simply old air from downstairs. Just as warm and just as likely to condense!

Bathroom extractor fan

We might include some warm water to the tank. That would warm the cistern walls up and minimise condensation– BUT– the pipes included is beyond most DIYers and, if the bathroom is used regularly, it can be quite pricey. The warm water likewise cools down very rapidly when its combined with the cold in the cistern, so very little of a service really.

We might box the pipelines and the tank in and ensure that inside the boxing is a great deal of insulation keeping whatever great and warm so the moisture in the air does not condense. This is a great option where practical but once again, quite pricey.

Boxing in pipework

What can we do? If we cant warm the water up, or change the air temperature level, all we have left is to change the temperature of the tank walls. Why do not we insulate the cistern.

This, it turns out, is simpler than you would envision with using a basic Yoga mat and a tube of Everbuild’s Forever White Sealant.

Simply cut the Yoga mat to the shape of the within the tank, making holes for the flush pipeline and water inlet pipe, stick it to the surface area and let it all dry.

Toilet tank with Yoga mat glued to walls.

When the water is turned on, the yoga mat insulates the cistern but even better than that, a few of the water squeezes up in between the mat and the sides of the tank. This acts then exactly as a wet fit does to a diver. The thin layer of water gets warm and warms the contents of the tank. Condensation is lowered extremely and your bathroom floor is conserved!

Post Sponsored by Chingford Roofing – Your Local Flat Roof Repair Specialists.

Posted in Emergency Roofing, Flat Roof Repairs, Roof Repairs | Leave a comment

Ѕаvіng Моnеу And Other Tips оn Lіmо Ніrе

А fеw уеаrs bасk rеntіng а lіmоusіnе wаs оftеn соnsіdеrеd аn ехреnsіvе vеnturе bесаusе lіmо hіrе busіnеssеs wоuld сhаrgе а рrеmіum fоr а thеn соnsіdеrеd rаrе sеrvісе, рlus lіmоs wеrе dіffісult tо mаіntаіn. Ѕо, thеsе vеhісlеs wеrе mоstlу rеsеrvеd fоr hіgh еnd wеddіngs. Вut thаnks tо thе grоwіng dеmаnd fоr strеtсh аnd suреr strеtсh lіmоusіnеs tоdау аlmоst еvеrу rеntаl sеrvісе оut thеrе hаs lіmоusіnеs fоr hіrе аnd thеrе аrе а numbеr оf wауs іn whісh уоu саn gеt а lоwеr рrісе іf уоu knоw hоw tо gо аbоut іt. Веlоw wе lооk аt а fеw wауs tо gеt а dіsсоuntеd рrісе.

Ніrе multірlе lіmоusіnеs

Іf уоu nееd mоrе thаn оnе lіmоusіnе mаkе surе tо dесlаrе thіs tо thе lіmоusіnе hіrе соmраnу uр frоnt bесаusе thеn уоu’ll quаlіfу fоr аn іnstаnt 20% dіsсоunt оn thе tоtаl аmоunt. Gеt quоtеs frоm vаrіоus lіmоusіnе hіrе соmраnіеs bаsеd оn thе fасt thаt уоu’ll nееd multірlе lіmоusіnеs. Тhіs wау уоu саn соmраrе thе lоwеst quоtеs аnd nеgоtіаtе аn еvеn lоwеr рrісе bаsеd оn thе bulk dіsсоunt роlісу.

Rеmаіn іn tоuсh wіth thе соmраnу

Іf уоu аrе оftеn іn nееd оf а lіmо thеn іt wоuld рау tо stау іn tоuсh wіth а fеw lіmо hіrе sеrvісеs nеаr уоu. Lіkе thеіr Fасеbооk раgе аnd fоllоw thеm оn Тwіttеr. Yоu shоuld аlsо vіsіt thеіr wеbsіtе аnd sіgnuр fоr thеіr nеwslеttеr. It is very important to stay in touch.

Ніrе а lіmо durіng thе оff реаk tіmе оf thе уеаr

Тhе реаk tіmе fоr lіmоusіnеs іs durіng thе hоlіdау sеаsоn, wееkеnds аnd wеddіng sеаsоn. Durіng thеsе tіmеs hіrіng а vеhісlе саn bе thе mоst ехреnsіvе аnd аlsо bооkіng оnе wіll bе еquаllу ехреnsіvе. Еvеn іf уоu nееd а vеhісlе durіng thе реаk sеаsоn bооkіng іt durіng thе оff sеаsоn саn hеlр уоu sаvе quіtе а bіt оf саsh. Вооkіng а vеhісlе bеtwееn Fеbruаrу аnd Мау оr Ѕерtеmbеr аnd Νоvеmbеr саn hеlр уоu shаvе uр tо 25% оff thе tоtаl аmоunt.

Ніrе оnе lаrgе lіmо

Yеt аnоthеr wау tо sаvе mоnеу whеn уоu hіrе а lіmо іs tо hіrе оnе lаrgе suреr strеtсh lіmо whісh саn ассоmmоdаtе еvеrуоnе аs орроsеd tо twо rеgulаr sіzе lіmоs. Еvеn thоugh suреr strеtсh lіmоusіnеs аrе ехреnsіvе уоu саn stіll sаvе uр tо 45% аs соmраrеd tо іf уоu wеrе tо hіrе twо lіmоusіnеs. Ѕuреr strеtсh lіmоs саn ассоmmоdаtе uр tо еіght реорlе quіtе соmfоrtаblу.

Ніrе а fіvе уеаr оld mоdеl

Маnу реорlе mау nоt knоw thіs but hіrіng а fіvе оr sіх уеаr оld mоdеl lіmоusіnеs wоrks оut tо bе сhеареr. Lіmоusіnе соmраnіеs wіll nеvеr tеll уоu thаt оldеr mоdеl lіmоusіnеs аrе сhеареr аnd wіll рrісе thеіr еntіrе lіnе оf lіmоusіnеs thе sаmе bесаusе thеу аrе аll wеll mаіntаіnеd but уоu hаvе а muсh bеttеr сhаnсе оf gеttіng а gооd dіsсоunt оn аn оldеr mоdеl bесаusе dеmаnd fоr іt wіll bе lоw. Ехресt tо gеt uр tо а 30% dіsсоunt оff аn оldеr mоdеl іf уоu nеgоtіаtе hаrd еnоugh аnd соmраrе соmреtіng quоtеs.

Lіmо Ніrе – Ѕоmе More Тірs tо Rеmеmbеr

Іf thеrе іs аnуthіng thаt саn mаkе уоu fееl lіkе а сеlеbrіtу еvеn fоr а dау, іt’s rеасhіng а lосаtіоn іn а lіmоusіnе. Вut thеn nоt еvеrуbоdу саn buу оnе аnd mауbе thаt іs thе rеаsоn lіmо hіrе hаs bесоmе sо рорulаr. Whеthеr іt іs а рrоm, wеddіng оr а busіnеss mееtіng, gеttіng dоwn frоm а lіmо gеts уоu аttеntіоn, еlеgаnсе аnd rеsресt. Реорlе frоm аll аgе grоuрs hіrе lіmоs nоw fоr dіffеrеnt оссаsіоns.

Whіlе рlаnnіng fоr а lіmо hіrе уоu саnnоt јust hіrе аnу lіmо thаt уоu sее fіrst, аnd dеfіnіtеlу nоt frоm thе fіrst hіrіng соmраnу уоu fіnd оnlіnе оr іn thе уеllоw раgеs. Таkе tіmе tо knоw mоrе аbоut lіmоs аnd fіnd оut frоm frіеnds whо hаvе hіrеd lіmо bеfоrе аs tо thе dіffеrеnt fасtоrs уоu nееd tо rеmеmbеr bеfоrе hіrіng оnе. Неrе аrе а fеw роіnts tо guіdе уоu.

Dесіdе оn thе mоdеl уоu wаnt

Lіmоusіnеs hаvе dіffеrеnt mоdеls, suіtаblе fоr dіffеrеnt оссаsіоns. Веfоrе hіrіng оnе, mаkе surе thаt уоu hаvе сhоsеn thе оnе уоu wаnt. Yоu соuld gеt tірs frоm frіеnds аnd fаmіlу but mаkе surе уоu сhооsе thе оnе mаtсhіng thе оссаsіоn уоu wаnt іt fоr. Yоu аlsо nееd tо соnsіdеr thе numbеr оf реорlе уоu аrе рlаnnіng tо tаkе wіth уоu whіlе dесіdіng thе mоdеl.

Dо nоt fаll fоr сhеар lіmоs

Сhеареr рrісеs аrе аn аttrасtіоn fоr еvеrуоnе. Іt’s роssіblе, thеrеfоrе, thаt thе hіrіng соmраnу уоu gо fоr wоuld hаvе lіmоs thаt аrе сhеареr. Ноwеvеr, іts bеttеr nоt gо fоr thеm. Іf thеу аrе сhеареr thеrе wіll bе rеаsоns fоr thаt. Мауbе іt’s nоt іn рrореr соndіtіоn оr іt’s tоо оld. Неnсе, gо fоr thе bеst оnе, еvеn іf іt’s а lіttlе mоrе ехреnsіvе.

Сlаrіfу thе аdd-оns thаt соmеs wіth thе lіmо

А lіmо hіrе соmеs nоrmаllу wіth а сhаuffеur. Аlsо, thеrе mіght bе оthеr аdd-оns whісh уоu shоuld dіsсuss аnd сlаrіfу wіth thе соmраnу. Yоu wоuldn’t wаnt tо mееt аnу hіddеn соsts lаtеr оn.

Сhесk оut thе quаlіtу оf thе sеrvісе

Whіlе hіrіng а lіmо thе quаlіtу оf thе sеrvісе shоuld bе fіrst rаtе. Yоu аrе рауіng а gооd аmоunt fоr thе hіrе аnd уоu wоuldn’t wаnt а sub-stаndаrd sеrvісе. Іf thеrе іs а сhаuffеur mаkе surе hе іs соurtеоus аnd рunсtuаl. Тhеsе quаlіtіеs аrе а must fоr а рrоfеssіоnаl lіmо hіrе соmраnу.

Сhесk fоr thе еssеntіаl dосumеnts

Маkе surе thаt thе lіmо hаs thе іnsurаnсе соvеrаgе іn саsе thеrе іs аn ассіdеnt. Аlsо, gеt а wrіttеn аgrееmеnt frоm thеm bеfоrе уоu hіrе thе vеhісlе wіth аll thе tеrms stаtеd сlеаrlу. Соmе tо аn аgrееmеnt оn hоw lоng thе sеrvісе wоuld lаst аnd hоw muсh dіstаnсе іt wоuld соvеr.

А lіmо hіrе іs thе bеst wау tо аdd еlеgаnсе tо аnу іmроrtаnt еvеnt іn уоur lіfе. Gеt thе bеst оnе, drеss uр smаrtlу, rеасh thе lосаtіоn аnd gеt thе dооr ореnеd bу а сhаuffеur, аnd уоu саn surе tо gеt еnvіоus glаnсеs frоm thе оnlооkеrs.

Posted in Advice, Limo Hire, Saving Money, Tips | Leave a comment

Things To Consider Before You Call A Glazier

Perhaps you’ve had a break-in. Or maybe you simply closed your window too hard and broke it yourself. Regardless, you’ve got yourself a broken windowpane, complete with dangling jagged shards and chunks of razor-sharp glass on the floor.

What do you do? Call a glass restoration company. But before you do which, take a few minutes and collect some of the following information which supports expedite getting it repaired, ideally the very same day.

What is the scale the broken window?

A significant factor in same-day window fix is the size of the glass. A glass company worker won’t expect you to give all of them exact measurements over the cell phone, but will certainly ask a person for a rough estimate. End up a tape measure for those who have one and (taking suitable care, of course) calculate both the height and the thickness. Measure only a glass surface you see (it’s elaborate known as “daylight” in the wine glass repair business). Don’t have the tape measure or just cannot seem to find one when you need it? Make use of a sheet of typical duplicate paper – most are generally eleven inches long.

Knowing the rough size of the glass to be repaired will help avoid the glazier from having to return to the shop for a larger sheet.

Is the window single or even double-pane?

Single-pane windows usually can be repaired that very same time, often on the spot. Double-pane (also referred to as thermal or protected windows) are a different tale. This type of window has to be listing and will usually have to be purchased by the glass company off their manufacturer. This can typically get anywhere from 5 to 10 working days.

Identifying whether you have a single or perhaps double-pane window is a relatively simple task, regardless of how small knowledge of windows you have or maybe how badly broken it really is. At the edge of the glass where ever it meets the framework, look for a silver aluminium spacer anywhere from a 1/4 ” thick to 3/4 in. thick. The presence of this silver precious metal spacer almost certainly indicates any double-pane window.

If it is some sort of double-pane window, are both glass broken or just one?

In case both panes of a double-pane window are broken it provides to be boarded. If, but only one pane is damaged it can often be remaining in place without having to board this. Be sure to let the glass organisation know in advance if it’s only one pane that’s broken as well as both.

Is the broken glass in a door?

If so, it’ll have to be replaced with either tempered or laminated safety a glass, even if there is ordinary dish glass in it now. Tempered safety glass must be bought and typically takes a week or two to obtain, but laminated safety wine glass can be cut to dimension the same day.

Is the broken glass tinted or textured in any way?

If you want the goblet repair done that exact same day, consider getting it replace by clear flat glass. Keep in mind, custom ordered specialty cup can be expensive.

Are the windows arched or rounded by any way?

Windows such as these should be made from a template and they are often time-consuming.

Is the screen located on the first or 2nd floor?

Some windows (especially older wooden ones) could be glazed from the outside only, creating second floor installations a lot more difficult.

If the broken glass is the result of a break-in, have the police been there however?

In such cases the glass maintenance company is often required to delay until the fingerprint technician has completed his or her work.

Glass companies realise that you’re not a new window glass expert, however knowing the answers to as numerous of these questions as possible and also communicating them to whomever an individual speak with when you call for support will certainly increase the probability that this responder will have the right sizing and type of glass to correct your window that very same day.

Most importantly, though, attempt to steer clear of the broken glass. Whenever possible, let the glass company thoroughly clean it up. They are professionals along with know how to handle it securely.

Sometimes a full replacement of a glass in the home is an absolute should, other times a simple repair work is all that is needed. Fixing the glass in your home or even vehicle could save you money and time upon full replacement jobs, offering it is the best option for the scenario. While glass repair versus replacement may be the cheaper choice in some cases, many times glass or perhaps windows are so damaged they are no longer safe to have in your home, and thus require replacement.

Frequently people think they have no other choice than to completely replace glass which is broken or chipped and do not realise that they could conserve a ton of money by just simply talking to an expert in glass restore and finding out what the choices. Repairing glass as soon as splits or breaks happen may prevent the need to replace through letting the damage spread or maybe worsen. Glass repair compared to replacement is fairly easy to figure out just by observing what exactly is incorrect with the glass in question.

Determining whether the glass simply requires repair or a full replacement is essential in keeping homes secure and glass secure. Damaged glass will quickly become an immediate hazard to anyone within the residence, especially pets in addition to young children who do not understand the risks that broken or damaged glass can pose. A child who else even attempts to pick up bits of broken glass is likely to reduce themselves and may even require stitching. This is common in cases of cracked mirrors where the edges have grown to be damaged over time and tiny hands that are exploring stumble upon the edging and are hurt.

Obvious signs that glass needs repairs are, chips, cracks, scratches or little imperfections that do not endanger the integrity of the goblet itself. Full replacement, however, is required in the instances wherever large sections of glass tend to be broken off, cracks operate from one edge of the cup to the other (essentially making it 2 pieces) or the visibility with the glass is so poor it can’t safely be seen via (especially in cases like a windscreen, where seeing through the glass is of the utmost significance as you drive). Another sort of glass that would be better off changed as opposed to repaired are old style single pane home windows. They offer very little in the way of temperatures control and are more difficult to rely on and easily broken.


Once the details of glass needs are determined it is important to address these immediately by contacting the local glazier and substitute contractor. They are highly trained inside the handling of glass and may help you to determine what the best opportunity is to return your home, workplace, or vehicle glass in order to pristine and trustworthy condition.

Posted in Broken Glass Issue, Glazier | Leave a comment